general@tekab.com.
Tuesday, October 20th, 2026
Products
Coaxial cables - 75 Ohms
RG-11 : CCS 75/5- RG59/U : CCS 75/18
- RG-216 : CCS 75/24
- RG-6/U : CCF 75/25
- RG-6/U : CCF 75/26
- RG-6/U : CCS 75/27
- RG-11/U : CCF 75/3
- RG-11/U : CCF 75/4
- RG-59/U : CCF 75/36
- RG-59/U : CCF 75/02
- RG-59/U : CCS 75/37
- RG-59/U : CCS 75/38
- RG-59/U : CCF 75/40
- RG-59/U : CCF 75/01
- RG-59/U : CCS 75/41
- URM57 : CCS 75/43
- URM70 : CCS 75/45
- 1.1/7.3 : CCS 75/47
- 1.8/11.5 : CCS 75/48
- CCF 75/7
- CCS 75/9
- CCF 75/11
- CCF 75/12
- CCS 75/13
- CCS 75/49
- CCS 75/50
- 3C-2V : CCS 75/51
- 4.5C-2V : CCF 75/52
- 5C-2V : CCS 75/53
- 7C-2V : CCS 75/54
- 0.4/1.9 : CCF 75/55
- 0.4/2.6 : CCS 75/56
- 0.75/4.8 : CCS 75/57
- CCS 75/65
- Coaxial cables - 50 Ohms
- RG58C/U : CCS 50/21
- RG122/U : CCS 50/22
- RG174/U : CCS 50/23
- RG213/U : CCS 50/20
- RG-8A/U : CCS 50/28
- RG-8/U : CCF 50/19
- RG-8/X : CCF 50/29
- RG-8/U : CCF 50/30
- RG58A/U : CCS 50/31
- RG58A/U : CCF 50/32
- RG58A/U : CCF 50/33
- RG58/U : CCS 50/34
- RG58/U : CCS 50/35
- URM43 : CCS 50/42
- URM67 : CCS 50/44
- URM76 : CCS 50/46
- Coaxial cables - BT
COAXIAL CABLE BT 3002 MULTIPAIRS
| Type | : |
|
||
| Specification | : | to BT CW1407 and BT CW1383 |
| Inner Conductor | : | Plain annealed bare copper wire of 0.31 mm dia to IEC 28 & IEC 189-1 |
| Inner Conductor dia (min/nom/max) | : | 0.305 / 0.31 / 0.315 mm |
| Dielectric | : | Solid PE type 03 to BS 6234. Minimum point thickness 0.75 mm |
| Dielectric dia (min/nom/max) | : | 1.85 / 1.95 / 2.05 mm |
| Outer Conductor | : | Two braids of plain annealed tinned copper wire of 0.1 mm dia |
| Outer Conductor dia (min/nom/max) | : | 2.75 / 2.85 / 2.95 mm |
| Sheath | : | PVC type TM1 to BS 7655. Minimum point thickness 0.3 mm |
| Sheath dia (min/nom/max) | : | 3.40 / 3.55 / 3.70 mm |
| Lay up | : | The required number of above described individual coaxial pairs are laid up in concentric formation. When necessary, a central filler may be used. The material of the filler shall be PVC type TM1. |
| Rip Cord | : | A non-metallic rip cord shall be laid under the sheath. |
| Outer Sheath | : | PVC type TM1 to BT M235 coloured white. |
| Direct Current Resistance of the inner conductor at 200C | : | Max 23.9 Ohm/100m |
| Insulation Resistance at 200C | : | Min 20M Ohm.km |
| Spark Test on the individually sheathed coaxial pairs | : | 2kV r.m.s. |
| Dielectric Voltage withstand | : | 3.5kV r.m.s. |
| Far End Signal to Crosstalk Ratio (FESXTR) | : | to CW 1383 |
| Characteristic impedance at 5MHz | : | 75 Ohm +/- 4 Ohm |
| Attenuation at 5MHz | : | Max 4.8 dB/100m |
| Resistance to flame propagation | : | to BT Specification M231 |
| PAIRS x BT 3002 | 2 | 8 | 16 | 27 |
| Min Sheath Thickness, mm | 0.3 | 1.1 | 1.1 | 1.4 |
| Overall Dia, mm (approax.) | 3.65x7.4 | 16 | 20 | 26 |
| Kg/Km (approx) | 59 | 380 | 620 | 960 |
Phone : +971 6 503 4900, E-mail : general@tekab.com
