general@tekab.com.
Thursday, November 21st, 2024
Type | : |
|
||
Specification | : | to IEC 60708 |
Conductor | : | Annealed bare solid copper |
Insulation | : | Solid, cellular or form-skin polyolefin material |
Identification | : | Colour coded (refer to technical section) |
Twisting | : | Two conductors are twisted into pair |
Stranding | : | In sub-units of 5 or 10 pairs in units for 50 or 100 pairs, and units of 50 or 100 pairs for more than 100 pairs |
Longitudinal watertightness | : | by filling the interstices of the cores with petroleum jelly compound |
Moisture barrier | : | Screen of longitudinally applied smooth copolymer coated aluminium tape |
Sheath | : | Black weather resistant PE |
Dielectric strength | : | 500V |
Min. Insulation Resistance at at 200C | : | 1500M Ohm.km |
Max Individual Mutual Capacitance | : | 64 nF/km |
Max Average Mutual Capacitance for cables more than or equal to 20 pairs | : | 56 nF/km |
Max Capacitance unbalance at 800 Hz per 500m length of cable | : | 275pF |
Max Conductor Loop Resistance at 200C | : | 133 Ohm/km |
Number of pairs | 10 | 20 | 30 | 50 | 70 | 100 | 150 | 200 | 300 | 400 | 500 | 600 | 800 |
OD (mm, approx) | 11 | 13 | 15 | 20 | 22 | 25 | 30 | 35 | 40 | 45 | 50 | 55 | 65 |
Kg/Km (approx) | 140 | 220 | 300 | 470 | 640 | 895 | 1300 | 1705 | 2505 | 3320 | 4090 | 4860 | 6444 |
Item Code for Form skin insulation : MFSE -- x 2 x 0.6
Solid PE insulation : EFSE -- x 2 x 0.6
Cellular PE insulation : CFSE -- x 2 x 0.6